20, April 2017

What To Use To Draw The PCB Fabrication Artwork

Printed circuit boardsPCB fabrication involves the use of a print device to be able to develop good quality artwork. Print devices that can be used are the following:

1. Manual Pen

It may not be the best option out there, but a manual pen can certainly be used to create low definition printed circuit boards or to do minor retouch on the artwork, such as closing pinholes. The pen to be used here should be a black permanent marker.

2. Dry Transfers

PCB fabrication may take time when dry transfers are used. Yet, this pricey technique enables the user to manually draw with an above average accuracy or to retouch the artwork a little.

3. Pen plotters

Really slow and tricky, pen plotters requires the use of pricey polyester drafting film. Never use a tracing paper for this since ink can just flow along the fibers. Special inks and ink pens with carved tips to obtain satisfactory outcomes. This print device needs regular cleaning as it clogs pretty quickly.

4. Inkjet printers

Because of its fairly cheap price, a lot of people just try to use it. However, ink jet printers may not yield a quality that is at par with laser printers. The major issue would be how to achieve black that is adequately unintelligible. Others use this print onto paper, which they will then photocopy onto a tracing paper using a high class copier.

5. Laser printers

Very reasonably priced, speedy and high quality, laser printers are easily the most all around print device option. It should have a minimum of 600 dpi resolution for all except for the most basic PCBs, since it entails doing work in multiples of 0.025 inch or 40 tracks per inch.

It is crucial that the printer generates an excellent solid black without the use of toner pinholes. For those who are thinking of purchasing a printer for PCB fabrication, perform some test prints first on tracing paper to determine its quality. Set the density control to ‘blackest’. Even the top laser printers do not typically cover huge areas well, but this is not often an issue provided that fine tracks are solid.

PCBWhen working with drafting film or tracing paper, always employ a manual paper feed. Make sure the paper output path is set straight to maintain the flatness of the artwork and avoid jamming. For small printed circuit boards, keep in mind that it is very possible to save paper just by cutting the sheet in half.

Some of these print devices have bad dimensional precision, which might lead to further problems for huge PCBs. Yet, as long as the error is only linear, it could be helped by scaling the printout. Print accuracy will probably be an obvious concern when it leads to misalignment of the double-sided PCBs’ sides. This could generally be averted by watchfully arranging the plots to make sure the error is identical on the two layers.

6. Typesetters

To achieve the finest quality of the artwork, create a postscript file. Then, take it to a typesetting service that will then produce a film of it. This will most likely posses no less than 2400 dpi resolution, perfectly sharp and opaque black. The charge is normally on a per page basis, irrespective of area used. Hence, if numerous PCB copies can fit on one page, it will definitely cut costs.

This can also be a great way to accomplish an occasional huge PCB that does not fit the laser printer. Typeset artworks are up to scratch for PCB fabrication, but a lot of PCB houses these days only go for gerber data, since it is simpler to post-process.

Author Bio
PCB fabrication is ready and able to produce the finest quality products that our customers have come to expect. PCB Fabrication is a professional printed circuit board (PCB) provider located in Washington State, USA. For more detail information visit pcbnet.

4, February 2017

What We Love With Challengecoins4less Coin Giveaways

We have seen every possible giveaway. From that corporate event, up to that recent family reunion, down to our best friend’s wedding.

Mostly, since souvenir is the least concern of some event organizers, not much of thought was given to it. This is the reason why some opt to give away easily available stuff like wine, mugs, key chains, or worst picture frames.


However in one event, we chance upon a custom-made coin which is made by ChallengeCoins4Less. These coins are just so stylish that we just can’t get enough of it.

We believe that this custom-made coins could start a new trend may it be in corporate events, down to family reunions.

So here are some of the things we love with ChallengeCoins4Less’ custom-made coins which you can try on your next event, and fall in love with it just like we did.

It’s Handy

We love just how handy ChallengeCoins4Less’ custom coins. Especially since that day we’ve seen it, there are several meetings we had to attend and this coin is so handy we just drop it in our bags and go on with the day.

This is advisable especially for those events attended by executives who rarely bring bags on their daily meetings. Giving them this coin is just so handy for them. They can simply place it in their pockets with the organizers not having to worry that they’ll leave it behind.

It’s a Unique Idea

Like we’ve said, many have grown tired of that traditional giveaway which was not given much thought. Those often end up being left behind or worst thrown away.


So upon seeing these coins make us think that it is just a perfect and unique idea for souvenirs from your events. Since it’s customized, you can give it a personal touch which your guests will always remember upon seeing the coin. Who knows, your company may be starting a trend because of these unique souvenir.

It’s Timeless

It’s a coin, and a coin can live for decades and decades. These coins could just be perfect as a collection of every milestone of your company from the years of its operation. You can place every new logo of your company on this coin, which you can later frame or even exhibit in the coming years.

So if you want to leave a lasting impression of your company or event that will transcend from generations to generations, then these coins are perfect souvenirs.


We believe these coins are just perfect for those milestones that you want to remember forever. It may be the change of logo that you company has undergone twenty years after you have started, or meeting your batch mates after thirty years of graduating from college. This can even be a coin that you want to pass on to the next generation of your family, which could serve as a family heirloom.

We simply think this kind of souvenir is perfect to leave a mark of an event or a milestone which could last a lifetime.

So are you ready to give ChallengeCoin4Less a chance? Here are some details that made us love it more.

The design creation for you coin is free of charge. So if you’re still undecided with the design of your coin or have an idea but need some help in enhancing it, they have creative people to help you out.

ChallengeCoinsThey also don’t limit your imagination to that typical circular coin. If you want it bigger, smaller, or in a different style, it’s possible. Just let them know what changes you want to make and they’ll let you know how to make it possible.

The metals to be used in your coin could also be personalized. They have five metals to choose from: silver, black, nickel, copper and gold.So what’s not to love with these custom-made coins? It’s handy, unique, timeless and commemorative, just like that milestone you have achieved.